1. Expansion screw method

You can use expansion screws, or you can measure the size first, make a hole, put sawdust inside, and then use a self-tapping inner screw to clamp the mirror.

2. Nailing method

Fix the decorative glass mirror on the base of the wall (or cylinder or top) with screws. The wall is required to be flat. Before installation, a layer of kraft paper should be pasted on the back of the glass mirror, and a layer of gasket should be laid between the mirror and the wall during installation. After installation, the perimeter should be sealed with sealing paste to prevent moisture intrusion.

3. Embedded pressure method

This method is generally used for vanity mirrors in bathrooms or dressing rooms. The frame of the glass mirror is made of stainless steel, aluminum alloy, or wood wire. Fix the frame to the wall base with nails, and then insert the glass mirror into the frame.

4. Adhesive method

Sand off the floating powder on the wall first. Attach to the back of the mirror with sealing tape. Use glass glue to apply dozens of coin-sized dots on the back of the mirror sealed with sealing tape, and press the mirror against the wall for a few minutes.

5. Adhesive installation

First use transparent tape on the back of the waterproof mirror, then paste it with glass glue, and seal it with glass and plastic around it to prevent the chemical reaction of mercury glass, plastic and waterproof mirror, and seal the surrounding mirror so that the back of the mirror is not dirty; Drill and mount wall Drill a pistol on the mirror. The plastic expansion tube is fitted with a glass stud trim cover that wraps the airtight glass.

Hangzhou Hengyi Mirror Industry not only has Frameless Dressing Mirror but also Bathroom Makeup Mirror and other products, welcome to check our official website.